• Staple up to 100 sheets of 20-lb. paper or equivalent at tap of electronic footswitch
• Re-loads in seconds with 4 sizes of Type HO staples - 1/4", 3/8", 1/2" and 5/8"
• "Hi-Low" switch to adjust stapling impact delivers the right stapling power every job
• Portable, no mounting, sets on desk, table, bench
• Direct-drive solenoid for tight, positive clinch
• Dual adjustable locking backstop to 4 inches depth for super neat stapling
• Jam-proof all steel staple mechanism
• Staple paper, corrugated, plastic, cardboard, cloth and more
• Made in U.S.A.

Please note:

1. Model SU-100 is generally recommended for stapling 20+ sheets of 20-lb. paper.
2. Model SU-100 requires that the proper size staple be used for each stapling job based on the number of sheets of paper (or equivalent material) being stapled. In other words, you cannot use the 5/8" staple to staple 25 sheets of 20-lb. paper because the staple leg length would be too long for that job.
3. Right leg of staple should be a minimum of 1.25" from right edge of material to activate the safety microswitch attached to the adjustable locking backstop on the right side of the stapling head.
4. Optional additional left side contact safety microswitch available on special order (to allow positioning right leg of staple closer than 1.25" from the right edge of material.)